Three-Piece Sanitary T-Clamp Ball Valve With ISO52
Three-Piece Sanitary T-Clamp Ball Valve With ISO5211 Mounting Pad
ïƒ˜ Body & end caps quality investment casting
ïƒ˜ with ISO 5211 direct mounting pad
ïƒ˜ Adjustable stem packing
ïƒ˜ Available in stainless steel or carbon steel
ïƒ˜ Blow-out proof stem design
ïƒ˜ 100% air tested under water at 80-100 psi
ïƒ˜ Working pressure: 1000/ 800/ 600 psi
ïƒ˜ Temperature range (PTFE) -20F to 350F
ïƒ˜ Temperature range (TFM) -20F to 420F
ïƒ˜ with locking function
ïƒ˜ End type: T-Clamp, Tube weld, Extended tube weld
ïƒ˜ 6 bolts & nuts for 4" valve
ïƒ˜ Spring return handle (dead man handle)
ïƒ˜ Oval handle
ïƒ˜ Cavity filled seats
ïƒ˜ Polish to custom's specification
ïƒ˜ ASME/ BPE (for SS316L)
ïƒ˜ low ferrite ( 3%)
ïƒ˜ low sulphur (0.005% to 0.017%)
ïƒ˜ Automation application
ïƒ˜ PTFE/ PFA coating (40-70 um)
ïƒ˜ Hastalloy C/ Super duplex/ Alloy 20/ Monel
JOBV 3-piece sanitary ball valve with ISO direct mounting pad is designed for food biological, pharmaceutics or similar industries. The cavity filled seat option will help not to remain the media in the body cavity to keep from spoiling or mixing. Cavity filler seats will also help to clean the valve port easily.
The options on end types can be T-Clamp, Tube weld end, Extended tube weld end. Different material of soft kits will be applicable for different working circumstance.
ASME/ BPE (for SS316L) standard are available on 302SD, with low ferrite ( 3%), and low sulphur (0.005% to 0.017%). The finish are available for Ra 40 uin or Ra 25 u-in.
The standard bare stem type is well designed for mounting actuator directly.
J&O offer pneumatic/ electric actuator and limit switch box/ solenoid valve/ modulating controller....assembling without further charge.
- 0 Reviews